« Back

印刷する

・General-purpose type
・Special-purpose type for pins

SS-33

Big Image

Characteristics

  1. Strong 1HP spindle motor enables use of a φ205mm cutting wheel.
  2. New cooling method that more effectively cools down the cutting wheel at its minimum diameter.
  3. Wide table that supports a variety of operations.
  4. Equipped with machine stand with casters.
  5. Vernier scales: 150mm, 300mm, and 500mm (optional specifications for general-purpose type).
  6. Easy exchange of cutting wheel via designated space on the table.

Enquiry Form

・General-purpose type
・Special-purpose type for pins

SS-31

Big Image

Characteristics

  1. Work table travel via rail.
  2. No restriction of installation location as it utilizes a 100V power source.
  3. Wide table that supports a wide variety of operations.
  4. Supports up to φ160mm NASTON.
  5. Vernier scales: 150mm, 300mm, and 500mm (optional specifications for general-purpose type).
  6. Easy exchange of cutting wheel via designated space on the table.

Enquiry Form

SS-33/31 Common Specifications

  • General-purpose Type Vise
    Double clamp system that reduces burrs and is provided with a 3mm-depth cutting wheel passage. Suits the cutting of small pieces of work and is equipped with a scaled 100mm measurement stopper on the right-hand side.

  • Special-purpose Type Vise for Pins
    Exclusively designed to cut the extruding pins of die. Equipped with a 300mm vernier scale on the left-hand side, measured cutting of a size of between 50mm and 300mm supported. Vernier scale 500mm (optional specification).

  • Space to Exchange Cutting Wheel
    A space to exchange the cutting wheel is provided on the table, thus realizing safe and quick exchanges of the cutting wheel without having to lift the table.

  • Spindle Stopper for Exchanging Cutting Wheel
    Spindle stopper provided in front of the belt cover on the right-hand side. The spindle can be locked without a special jig before exchanging the cutting wheel.

  • Vernier Scale

    Makes finely adjusting the position of the measuring stopper easily.

    * Optional specification for general-purpose type (optional specifications: 150mm, 300mm, and 500mm)
    * 300mm comes with special-purpose type for pins (optional specification: 500mm)

Standard Specifications

SS-33 SS-31
Standard cutting capacity ○□pipe 30mm, ●■solid bar 25mm, ■plate 10mm x 75mm ○□20mm pipe, ●■solid bar 15mm, ■ plate 5mm x 80mm
Work table travel 140mm (manual) 130mm (manual)
Jaw opening size 0-75mm slide type 0-80mm slide type
Spindle revolutions
per minute		 2500/3000rpm・50Hz/60Hz 3000/3600rpm・50Hz/60Hz
Diameter of cutting wheel φ205mm/φ25.4mm φ160mm・φ150mm/φ25.4mm
Spindle motor AC200V・3 phase・4P・0.75kW AC100V・single phase・4P・400W
Coolant pump, Tank AC200V・3 phase・40W, 30liters AC100V・single phase・10W, 4.5liters
Dimensions (W x L x H) 410mm x 740mm x 1040mm 450mm x 720mm x 430mm
Machine weight 80kg 54kg
Accessories 1 set of scales, 1 set of cutting wheels for testing, pin face wrench,
FINECOOL, and 1 set of Paper Filters		 1 set of scales, 1 set of cutting wheels for testing, pin face wrench, FINECOOL,
and 1 set of Paper Filters

* Please consult the voltage change.

« Back

PAGE TOP