« Back

印刷する

Diamond Abrasive Cutting Wheel for Hard Brittle Materials

NASTON GOLD

Big Image

The NASTON GOLD enables extremely precise cutting of hard brittle materials, including cemented carbide / ceramics / semiconductors / glasses, magnetic materials including ferrite / sendust, and difficult-to-cut compound materials.

Has superior processing qualities that allow soft cutting with minimal chipping.

Enquiry Form

NASTON GOLD

Parts No. Size (mm) Code No. Application
O.D. x T x I.D.
TC−1
(#140)		 75 x 0.5 x 6.0 TC1−07505 Cemented carbide
Ferrite
Tungsten
Other magnetic materials
90 x 0.5 x 10.0 TC1−09005
150 x 0.5 x 25.4 TC1−15005
180 x 0.6 x 25.4 TC1−18006
205 x 0.7 x 25.4 TC1−20507
230 x 0.8 x 25.4 TC1−23008
255 x 1.0 x 31.75 TC1−25510
TC−2
(#180)		 150 x 0.5 x 25.4 TC2−15005 Ceramics
Hard glass
Quartz/crystals etc.
180 x 0.6 x 25.4 TC2−18006
205 x 0.7 x 25.4 TC2−20507
230 x 0.8 x 25.4 TC2−23008
255 x 1.0 x 31.75 TC2−25510
TC−0 150 x 0.5 x 25.4 TC0−15005 Multipurpose
ultra−hard materials
205 x 0.7 x 25.4 TC0−20507

NASTON H Series (25 disks/box)

NASTON H Series (25 disks/box)

Parts No. Size (mm) Code No. Size (mm) Code No. Material to be Cut
O.D. x T x I.D. O.D. x T x I.D.
H−10 205 x 0.5 H10−20505 230 x 0.6 H10−23006 Steel materials in general
H−12 205 x 0.5 H12−20505 230 x 0.6 H12−23006 Heat-treated materials and special steel
H−15 205 x 0.5 H15−20505 230 x 0.6 H15−23006 Non-ferrous materials in general
H−22 205 x 0.5 H22−20505 230 x 0.6 H22−23006 Copper, brass and stainless steel
H−32 205 x 0.5 H32−20505 230 x 0.6 H32−23006 Stainless steel, tungsten, molybdenum, non-ferrous materials, and noble metals such as gold and silver etc.
H−40 205 x 0.5 H40−20505 230 x 0.6 H40−23006

For Dry-type BIRDIE (25 sheets/box)

Parts No. Size (mm) Code No. Material
NASTON-A 160 x 0.7 BDA−16007 General carbon steel and tools steel
NASTON-B 160 x 0.7 BDB−16007 Resin and Bakelite
NASTON-C 160 x 0.7 BDC−16007 Copper, brass, and stainless steel

For S-5/MM-G (50 sheets/box)

Parts No. Size (mm) Code No. Material
A100P 90 x 0.5 A100P−09005 General carbon steel and tools steel
GC320P 90 x 0.5 GC320P−09005 Stainless steel, resin, and noble metals such as gold and silver etc.
WA120P 90 x 0.5 WA120P−09005 Copper, brass, and stainless steel

For Baby-size Wheel for FiNECUT S-2 (50 sheets/box)

Parts No. Size (mm) Code No. Material
A100P 75 x 0.5 A100P−07505 General carbon steel and tools steel
GC150P 75 x 0.5 GC150P−07505 Resin and Bakelite
WA120P 75 x 0.5 WA120P−07505 Copper, brass, and stainless steel

Segment Grinding Stones for Face Grinder LM-P/LM-O

Parts No. Finish Set Code No. Material
Medium mesh Medium finish 6 pcs B−6−6 Hard/soft iron alloys Cast iron and a wide range of precise cut steels etc.
Difficult-to-cut of tool steel, die steel, and tempered alloys
8 pcs B−6−8
Fine mesh Fine finish 6 pcs B−12−6
8 pcs B−12−8

Metal Bond Diamond Wheel

Parts No. Size (mm) Code No.
O.D. x T x I.D.
SD 150 x 0.5 x 25.4 SD−15005 This cutting wheel uses a metal bond around a heavy-duty alloy to form the diamond abrasive grain layer.
200 x 0.8 x 25.4 SD−20008

Paper Filter (Filter paper)

Size (mm) Code No. Applicable Model
165x165 (20 sheets) SF−01 SS-31, M-30, (former 31), Birdie II
350x450 (20 sheets) SF−02 N-7, SS-33, (former 32), HS-45AC, 32F-200/300
410x490 (20 sheets) SF−03 HS-100, HS-45, ACE-20/30
Super Seven/310, 32F-500
410x100m (1 roll) SF−11 For filter separator tank
410x50m (1 roll) SF−12

« Back

PAGE TOP