NASTON GOLD
NASTON
FINE CUT
Supplies for FINE CUT
General catalogue
This bench top precision cutting machine was developed for use in research field. It is suitable for use in cutting crystalline structures to study their physicality, removing sample flakes for electronic microscopes, and other samples of electronic materials/ceramics/various metals.
Travel along the X-Axis (right/left travel of work table), Y-Axis (front-rear travel of work table), and Z-Axis (vertical movement of spindle) are all supported in thereby corresponding to various cutting conditions.
Characteristics
- Easy measurement of up/down of cutting wheel (1/10mm scale) and right/left of work table (4/100mm scale) via vertical movement of spindle and precision slide table.
- Equipped with a clear cover interlock (safety device).
- Full-covered type that prevents spattering of water soluble cutting fluid.
- Space-saving bench type.
Optional Specifications Line Up
| ①Surface rotary vise | |
|---|---|
| ②Machine stand with casters | |
| ③Spindle rotation inverter | OP-RCO |
| ④Antirust treated machine body | OP-AC |
* See the available options on pages 12-13 for the lineup of optional accessories and specifications.
- ① Scale ring for work table side travel
- ② Accessory vise [jaw opening size 0-25mm]
- ③ Coolant discharge adjustment cock
- ④ Cutting wheel fixing knob
- ⑤ Embedded coolant tank
- ⑥ Spindle vertical steering wheel
- X Work table travel: 60 cross feed (manual)
- Y Cutting direction travel: 150mm front to rear movement (auto)/(manual with front steering wheel)
- Z Spindle travel: 50mm vertical movement (manual with upper steering wheel)
Standard Specification
| HS-25 (manual) | HS-25 (auto/manual) | |
|---|---|---|
| Standard cutting capacity | ○□pipe 25mm, ●■solid bar 20mm, ■plate 5mm x 50mm | |
| Flake cutting | 0.2mm at φ20mm (hard metals) | |
| Cutting tolerance | Squareness 0.05mm, parallelism 0.1mm for SK steel φ20mm | |
| Work table travel (X, Y) | 60mm in cross feed (manual)・150mm in cutting direction (manual) | |
| Spindle travel (Z) | 50mm vertically (manual) | |
|
Automatic cutting,
Return speeds |
− | 3-47mm/3-57mm (50/60Hz) per min. (stepless) |
| Diameter of cutting wheel | φ150mm/φ25.4mm | |
| Diameter of flange | φ80mm | |
|
Diameter of spindle,
Revolutions per minute |
φ25.4mm, 3400rpm (50Hz)/4100rpm (60Hz) | |
| Spindle motor | AC200V・3 phase・400W | |
| Coolant pump, Tank | AC200V・single phase・10W, built-in type | |
| Automatic cutting motor | − | |
| Dimensions (W x L x H) | 620mm x 670mm x 580mm | |
| Machine weight | 85kg | |
| Accessories |
Dedicated vise, 1 set of cutting wheels for testing, FINECOOL,
spindle oil, and spindle stopper |
|
* Please consult the voltage change.
