NASTON GOLD
NASTON
FINE CUT
Supplies for FINE CUT
General catalogue32F-200
This manual cutting machine has a slide table and can be used to cut a wide range of materials from plates through to bars. It supports the stable cutting of stainless steel, carbon, glass, quartz, substrates, and samples.
Characteristics
Double clamp system
Clamping both sides of the material to be cut prevents cracks, breaks, or burrs during the cutting process.
* Photo taken without clear cover.
Two types of scale units, one for bars and the other for plates, are provided as standard equipment.
Measurement cutting is available for long materials or plates of a cut size of up to 150mm.
Standard Specification
| 32F-200 | |
|---|---|
| Standard cutting capacity |
○□pipe 30mm, ●■solid bar 25mm,
plate 10mm x 200mm (T x W) |
| Slide table travel | 400mm in cutting direction (manual) |
| Automatic cutting, Return speeds | − |
| Clamping method | Double clamp |
| Jaw opening size | 0-200mm |
| Diameter of cutting wheel | φ205mm/φ25.4mm |
| Diameter of flange | φ80mm |
|
Diameter of spindle,
(spindle) revolutions per minute |
φ25.4mm, 2500/3000rpm (50/60Hz) |
| Spindle motor | AV200V・3 phase・4P・0.75kW |
| Coolant pump, Tank | AV200V・3 phase・40W, 30liters |
| Dimensions (W x L x H) | 510mm x 1250mm x 980mm |
| Machine weight | 143kg |
| Accessories | 1 set of cutting wheels for testing, FINECOOL, and 1 set of Paper Filters |
- * The actual cutting capability/tolerance may vary depending on the cutting conditions such as the type of material/cutting wheel.
- * Please consult the voltage change.
