The NASTON GOLD enables extremely precise cutting of hard brittle materials, including cemented carbide / ceramics / semiconductors / glasses, magnetic materials including ferrite / sendust, and difficult-to-cut compound materials.
Has superior processing qualities that allow soft cutting with minimal chipping.
NASTON GOLD
Parts No. | Size (mm) | Code No. | Application |
---|---|---|---|
O.D. x T x I.D. | |||
TC−1
(#140) |
150 x 0.5 x 25.4 | TC1−15005 |
Cemented carbide
Ferrite Tungsten Other magnetic materials |
180 x 0.6 x 25.4 | TC1−18006 | ||
205 x 0.7 x 25.4 | TC1−20507 | ||
230 x 0.8 x 25.4 | TC1−23008 | ||
255 x 1.0 x 31.75 | TC1−25510 | ||
TC−2
(#180) |
150 x 0.5 x 25.4 | TC2−15005 |
Ceramics
Hard glass Quartz/crystals etc. |
180 x 0.6 x 25.4 | TC2−18006 | ||
205 x 0.7 x 25.4 | TC2−20507 | ||
230 x 0.8 x 25.4 | TC2−23008 | ||
255 x 1.0 x 31.75 | TC2−25510 | ||
TC−0 | 150 x 0.5 x 25.4 | TC0−15005 |
Multipurpose
ultra−hard materials |
205 x 0.7 x 25.4 | TC0−20507 | ||
MM−1 | 90 x 0.5 x 10.0 | MM−1 | S−5/MM−G models |
NASTON H Series (25 disks/box)
Parts No. | Size (mm) | Code No. | Size (mm) | Code No. | Material to be Cut |
---|---|---|---|---|---|
O.D. x T x I.D. | O.D. x T x I.D. | ||||
H−10 | 205 x 0.5 | H10−20505 | 230 x 0.6 | H10−23006 | Steel materials in general |
H−12 | 205 x 0.5 | H12−20505 | 230 x 0.6 | H12−23006 | Heat-treated materials and special steel |
H−15 | 205 x 0.5 | H15−20505 | 230 x 0.6 | H15−23006 | Non-ferrous materials in general |
H−22 | 205 x 0.5 | H22−20505 | 230 x 0.6 | H22−23006 | Copper, brass and stainless steel |
H−32 | 205 x 0.5 | H32−20505 | 230 x 0.6 | H32−23006 | Stainless steel, tungsten, molybdenum, non-ferrous materials, and noble metals such as gold and silver etc. |
H−40 | 205 x 0.5 | H40−20505 | 230 x 0.6 | H40−23006 |
Metal Bond Diamond Wheel
Parts No. | Size (mm) | Code No. | |
---|---|---|---|
O.D. x T x I.D. | |||
SD | 150 x 0.5 x 25.4 | SD−15005 | This cutting wheel uses a metal bond around a heavy-duty alloy to form the diamond abrasive grain layer. |
200 x 0.8 x 25.4 | SD−20008 |
Paper Filter (Filter paper)
Size (mm) | Code No. | Applicable Model |
---|---|---|
165x165 (20 sheets) | SF−01 | SS-31, M-30, (former 31), Birdie II |
350x450 (20 sheets) | SF−02 | N-7, SS-33, (former 32), HS-45AC, 32F-200/300 |
410x490 (20 sheets) | SF−03 |
HS-100, HS-45, ACE-20/30
Super Seven/310, 32F-500 |
410x100m (1 roll) | SF−11 | For filter separator tank |
410x50m (1 roll) | SF−12 |
For Dry-type BIRDIE (25 sheets/box)
Parts No. | Size (mm) | Code No. | Material |
---|---|---|---|
NASTON-A | 160 x 0.7 | BDA−16007 | General carbon steel and tools steel |
NASTON-B | 160 x 0.7 | BDB−16007 | Resin and Bakelite |
NASTON-C | 160 x 0.7 | BDC−16007 | Copper, brass, and stainless steel |
For S-5/MM-G (50 sheets/box)
Parts No. | Size (mm) | Code No. | Material |
---|---|---|---|
A100P | 90 x 0.5 | A100P−09005 | General carbon steel and tools steel |
GC320P | 90 x 0.5 | GC320P−09005 | Stainless steel, resin, and noble metals such as gold and silver etc. |
WA120P | 90 x 0.5 | WA120P−09005 | Copper, brass, and stainless steel |
For Baby-size Wheel for FiNECUT S-2 (50 sheets/box)
Parts No. | Size (mm) | Code No. | Material |
---|---|---|---|
A100P | 75 x 0.5 | A100P−07505 | General carbon steel and tools steel |
GC150P | 75 x 0.5 | GC150P−07505 | Resin and Bakelite |
WA120P | 75 x 0.5 | WA120P−07505 | Copper, brass, and stainless steel |
Segment Grinding Stones for Face Grinder LM-P/LM-O
Parts No. | Finish | Set | Code No. | Material |
---|---|---|---|---|
Medium mesh | Medium finish | 6 pcs | B−6−6 |
Hard/soft iron alloys Cast iron and a wide range of precise cut steels etc.
Difficult-to-cut of tool steel, die steel, and tempered alloys |
6 pcs | B−12−6 | |||
Fine mesh | Fine finish | 8 pcs | B−6−8 | |
8 pcs | B−12−8 |